Apoxie® Sculpt, 4 lb. package. Endless uses for mixed media, assemblage and jewelry artists, crafters, restorers, modelers, and more! This is a two-part product with a putty-like, smooth consistency, and is easy to mix and use: measure equal parts of A and B (both have a clay-like consistency) and mix/knead them together for 2 minutes, until thoroughly combined and a uniform color is achieved. Apoxie Sculpt adheres to plastic, resin kits, wood, metal, ceramic, glass, polymers, foam, fiberglass, and much more. It is safe and waterproof (great for outdoor projects) with 0% shrinkage/cracking. Your working time is 2-3 hours; the product cures rock-hard in 24 hours (self-hardening; no ovens, kilns or fumes) with a semi-gloss finish. Before it sets up, Apoxie Sculpt can be seamlessly feathered, smoothed or textured with your fingers, tools, or with water or Aves® Safety Solvent
. After a full cure, it can be sanded, tapped, drilled, carved, lathed, or otherwise tooled without chipping, cracking or flaking! Apoxie Sculpt can be painted wet or dry before set-up as well as after. Simple soap/water clean-up or use Aves Safety Solvent.